Auto Nesting for Countertops: How Stonify Calculates Your Slabs in Under a Second

Every countertop quote starts with the same question: how many slabs does this job need? Guess too low and you pay for an extra slab yourself. Guess too high and you lose the job on price.
Most shops still answer it by hand, sketching pieces onto slab outlines or guessing from square footage. Auto nesting answers it for you. In Stonify, you draw the job, click Auto Nest, and every piece lands on slabs in under a second, with the slab count and material cost ready for the quote.
What Is Auto Nesting for Stone Fabricators?
Auto nesting is software that places every countertop piece onto the fewest slabs possible, automatically. It takes your drawn pieces (countertops, backsplashes, waterfalls, cutouts), leaves the gap your saw needs between pieces, keeps a margin from the slab edge, matches veins between neighboring pieces, and adds slabs only when the pieces don’t fit.
For a stone fabricator, auto nesting turns slab planning from a hand sketch into a one-click step. The output is the number every estimator needs: how many slabs, and what the material costs.
How Stonify Auto Nests a Kitchen, Step by Step
Here’s a real example: a full kitchen with a partial backsplash, drawn and nested in under 40 seconds.
Draw the pieces. Drag and snap each countertop, backsplash and island piece into place, and add sink and cooktop cutouts.
Set the backsplash. Full width or partial, your call.
Click Auto Nest. Set the gap between pieces (your kerf) and the margin from the slab edge. Stonify adds slabs automatically when the pieces don’t fit on the ones you have. Turn on Vein matching to line up the veins between neighboring pieces, and Lock vein direction to keep every piece running the same way on the slab.
Read the result. In this kitchen: 3 slabs, $3,102.30 material cost, priced by full slab.
Spin it in 3D. Show the customer the finished kitchen before anything is cut.
The nesting itself takes under a second. Drawing the kitchen takes a few minutes, and the drawing becomes the quote.
Why Auto Nesting Matters for Your Shop
Save time. Slab planning drops from a hand sketch to one click. The nest runs in under a second, so estimators move on to the next quote.
Save material. Auto Nest rearranges every piece onto slabs to minimize waste, and only adds a slab when the pieces truly don’t fit.
Match the veins. Vein matching lines up the pattern between neighboring pieces, and Lock vein direction keeps the grain running one way. Seams on veined quartz and marble look planned, not patched.
Quote with confidence. Slab count and material cost come straight from the nest, so the price on the quote matches what you’ll actually cut.
Fewer surprises at the saw. Kerf and edge margin are built into the layout, not guessed later.
Sell the job. The same drawing spins in 3D, so the customer sees the finished kitchen before signing.

Stonify scores the vein match on every seam before you cut.
Auto Nesting for Quartz, Granite and Natural Stone
Auto Nest works the same for any slab material. Each piece is nested onto slabs of its own material, so a kitchen with a quartz perimeter and a granite island gets the right slab count for each.
Quartz: consistent slab sizes make the nest predictable, so the slab count you quote is the count you order.
Granite and marble: nest onto the slab sizes you actually stock, see the result before you pull a slab from the rack, and use vein matching so the pattern lines up between neighboring pieces.
Porcelain and other surfaces: the same steps, with your own kerf and edge margin.
Use Stonify Just for Auto Nesting
You don’t need to switch your whole shop to get auto nesting. Some fabricators use Stonify only for drawing and nesting, alongside the systems they already run.
The Drawing package covers drawing, auto nesting, cutouts and the 3D view. If you later want quotes, scheduling, inventory and finance in the same place, the full Stonify ERP builds on the same drawings, so nothing is redone.

The same drawing, in 3D, before anything is cut.
Auto Nesting FAQ
What Is Autonest for Countertops?
Autonest (auto nesting) places every countertop piece onto the fewest slabs automatically, and tells you the slab count and material cost.
How Fast Is Stonify’s Auto Nesting?
The nest runs in under a second. Drawing a full kitchen takes a few minutes.
Does Auto Nesting Work for Quartz and Granite?
Yes. Each piece is nested onto slabs of its own material, so mixed-material kitchens get the right count per material.
Can I Set My Saw’s Kerf?
Yes. Set the gap between pieces and the margin from the slab edge before you nest.
Does Stonify Auto Nesting Match Veins?
Yes. Turn on Vein matching to line up the veins between neighboring pieces, and Lock vein direction to keep the grain running the same way on every piece.
How Many Slabs Do I Need for My Kitchen?
It depends on the pieces, the slab size and the material. Draw the kitchen in Stonify and Auto Nest gives you the exact count in under a second.
Can I Use Stonify Only for Nesting?
Yes. The Drawing package covers drawing and auto nesting without the full ERP.
See Auto Nesting on Your Own Job
Bring a real kitchen from your shop. In a 30-minute demo, we’ll draw it, auto nest it and show you the slab count and material cost, live.
Ready to Run a Smarter Stone Operation?
Book a demo to see how Stonify can reduce costs at your shop.
Ready to Run a Smarter Stone Operation?
Book a demo to see how Stonify can reduce costs at your shop.
Auto Nesting for Countertops: How Stonify Calculates Your Slabs in Under a Second

Every countertop quote starts with the same question: how many slabs does this job need? Guess too low and you pay for an extra slab yourself. Guess too high and you lose the job on price.
Most shops still answer it by hand, sketching pieces onto slab outlines or guessing from square footage. Auto nesting answers it for you. In Stonify, you draw the job, click Auto Nest, and every piece lands on slabs in under a second, with the slab count and material cost ready for the quote.
What Is Auto Nesting for Stone Fabricators?
Auto nesting is software that places every countertop piece onto the fewest slabs possible, automatically. It takes your drawn pieces (countertops, backsplashes, waterfalls, cutouts), leaves the gap your saw needs between pieces, keeps a margin from the slab edge, matches veins between neighboring pieces, and adds slabs only when the pieces don’t fit.
For a stone fabricator, auto nesting turns slab planning from a hand sketch into a one-click step. The output is the number every estimator needs: how many slabs, and what the material costs.
How Stonify Auto Nests a Kitchen, Step by Step
Here’s a real example: a full kitchen with a partial backsplash, drawn and nested in under 40 seconds.
Draw the pieces. Drag and snap each countertop, backsplash and island piece into place, and add sink and cooktop cutouts.
Set the backsplash. Full width or partial, your call.
Click Auto Nest. Set the gap between pieces (your kerf) and the margin from the slab edge. Stonify adds slabs automatically when the pieces don’t fit on the ones you have. Turn on Vein matching to line up the veins between neighboring pieces, and Lock vein direction to keep every piece running the same way on the slab.
Read the result. In this kitchen: 3 slabs, $3,102.30 material cost, priced by full slab.
Spin it in 3D. Show the customer the finished kitchen before anything is cut.
The nesting itself takes under a second. Drawing the kitchen takes a few minutes, and the drawing becomes the quote.
Why Auto Nesting Matters for Your Shop
Save time. Slab planning drops from a hand sketch to one click. The nest runs in under a second, so estimators move on to the next quote.
Save material. Auto Nest rearranges every piece onto slabs to minimize waste, and only adds a slab when the pieces truly don’t fit.
Match the veins. Vein matching lines up the pattern between neighboring pieces, and Lock vein direction keeps the grain running one way. Seams on veined quartz and marble look planned, not patched.
Quote with confidence. Slab count and material cost come straight from the nest, so the price on the quote matches what you’ll actually cut.
Fewer surprises at the saw. Kerf and edge margin are built into the layout, not guessed later.
Sell the job. The same drawing spins in 3D, so the customer sees the finished kitchen before signing.

Stonify scores the vein match on every seam before you cut.
Auto Nesting for Quartz, Granite and Natural Stone
Auto Nest works the same for any slab material. Each piece is nested onto slabs of its own material, so a kitchen with a quartz perimeter and a granite island gets the right slab count for each.
Quartz: consistent slab sizes make the nest predictable, so the slab count you quote is the count you order.
Granite and marble: nest onto the slab sizes you actually stock, see the result before you pull a slab from the rack, and use vein matching so the pattern lines up between neighboring pieces.
Porcelain and other surfaces: the same steps, with your own kerf and edge margin.
Use Stonify Just for Auto Nesting
You don’t need to switch your whole shop to get auto nesting. Some fabricators use Stonify only for drawing and nesting, alongside the systems they already run.
The Drawing package covers drawing, auto nesting, cutouts and the 3D view. If you later want quotes, scheduling, inventory and finance in the same place, the full Stonify ERP builds on the same drawings, so nothing is redone.

The same drawing, in 3D, before anything is cut.
Auto Nesting FAQ
What Is Autonest for Countertops?
Autonest (auto nesting) places every countertop piece onto the fewest slabs automatically, and tells you the slab count and material cost.
How Fast Is Stonify’s Auto Nesting?
The nest runs in under a second. Drawing a full kitchen takes a few minutes.
Does Auto Nesting Work for Quartz and Granite?
Yes. Each piece is nested onto slabs of its own material, so mixed-material kitchens get the right count per material.
Can I Set My Saw’s Kerf?
Yes. Set the gap between pieces and the margin from the slab edge before you nest.
Does Stonify Auto Nesting Match Veins?
Yes. Turn on Vein matching to line up the veins between neighboring pieces, and Lock vein direction to keep the grain running the same way on every piece.
How Many Slabs Do I Need for My Kitchen?
It depends on the pieces, the slab size and the material. Draw the kitchen in Stonify and Auto Nest gives you the exact count in under a second.
Can I Use Stonify Only for Nesting?
Yes. The Drawing package covers drawing and auto nesting without the full ERP.
See Auto Nesting on Your Own Job
Bring a real kitchen from your shop. In a 30-minute demo, we’ll draw it, auto nest it and show you the slab count and material cost, live.
Ready to Run a Smarter Stone Operation?
Book a demo to see how Stonify can reduce costs at your shop.


