Pricing & Quoting

How to write a countertop quote: what to include, a sample and how to avoid disputes

What a countertop quote must include, a sample quote, scope and exclusion wording, options and upgrades, payment and validity terms, and the gaps that cause disputes.

, CEO, Stonify

A countertop quote should say exactly what will be built, from what, for how much, by when, and on what terms. At minimum it names the material (brand, color, thickness, finish and, for natural stone, the slab or lot), states the square footage and how it was measured, lists the edge profile and every cutout, hole, backsplash and service with its price, spells out what is not included, and sets the payment schedule, validity period, change-order rule and warranty. Most countertop disputes start with something the quote left vague: which slab, which edge, whether tear-out or plumbing was included, or what happens to the price after templating. A clear quote prevents them, and once signed it usually becomes the contract.

What a quote has to do

A countertop quote does three jobs at once.

  1. It sells. It is often the only thing the customer takes home, and it sits next to two or three competing bids.

  2. It defines scope. It is the shop's record of what was promised. The templater, the saw operator and the installer should all be able to work from it.

  3. It becomes the contract. A quote with a price, terms and the customer's signature generally works as a binding agreement. An unsigned quote is only an offer.

A quote that only sells, such as "Kitchen countertops, quartz, $4,400", fails the other two jobs. It invites the customer to assume the backsplash, tear-out and plumbing are included, and it gives the shop nothing to point to when they are not.

What to collect before you write it

An accurate quote needs these facts. For a first quote before templating, rough measurements and good photos are enough, as long as the quote says so.

  • Material: brand, color name and thickness, not "white quartz". For natural stone, the specific slab or lot if the customer has picked one.

  • Layout and size: a sketch or plan with each run's length and depth, the island, and any seating overhang.

  • Edges: which edges are exposed and which profile goes on each.

  • Sink and cooktop: the model numbers. Undermount and farmhouse cutouts are cut to the exact sink.

  • Holes: faucet type (one hole or three), soap dispenser, filter tap, air gap.

  • Backsplash: none, 4-inch stone, full-height stone, or tile by others.

  • Existing tops: laminate, tile or stone, and who removes them.

  • Site: address and distance, floor and access (stairs, elevator), whether cabinets are installed and level.

For quotes from photos, ask for 8 to 12 shots: a wide view of each run, top-down views of the sink and cooktop, every corner that is not square, the existing edge, and the walls. Photos do not replace templating, which measures to about 1/8 inch or better. See measuring and square footage.

What every countertop quote should include

Section

What to put in it

1. Shop details

Company name, address, phone, license number where your state issues one, insurance

2. Customer and job

Name, job address, contact, quote number and date, version number if revised

3. Material

Brand, color, thickness (for example "3cm, about 1-3/16 in"), finish, slab or lot number for natural stone, number of slabs if priced by slab

4. Measurements

Finished square footage per room, whether it is a pre-template estimate or measured from the template, how the shop measures (full rectangles, sink openings not deducted), and the rule for adjusting the price after templating

5. Line items

Material and fabrication, edge profile by name with linear feet, each cutout by type, extra holes, backsplash, waterfall, seams if any are unusual, support brackets, templating, delivery and installation, tear-out, sealing, trip charges

6. Included and not included

What the price covers and, just as clearly, what it does not

7. Drawing and seams

A layout drawing showing pieces and seam locations, attached or referenced

8. Customer responsibilities

Cabinets installed and level, sink and faucet on site, appliances moved, plumbing disconnected, clear access

9. Timeline

Template after deposit, fabrication time after template approval, install window

10. Payment

Deposit, balance and when it is due, accepted payment methods and any card fee

11. Validity and price lock

How long the price holds and what locks it

12. Changes

How changes are priced and approved

13. Warranty

Workmanship warranty term and what it covers, and a note that the material warranty comes from the manufacturer

14. Natural variation

Natural stone varies from sample to slab and within a slab; the approved slab is the standard

15. Acceptance

Signature and date lines, or an online approval

Items to state as excluded unless you include them

Say "not included" in writing for anything you do not do. Common exclusions:

  • Plumbing disconnect and reconnect, and electrical work

  • Removal and disposal of existing tops (or price it as a line)

  • Sinks, faucets and fixtures unless sold by the shop

  • Cabinet modifications, leveling or reinforcement, including cutting the rail for a farmhouse sink

  • Tile backsplash, painting and wall repair

  • Permits

  • Damage to walls, floors or cabinets during removal of old tops

A sample quote

Here is how the pieces fit together for a 42 sq ft L-shaped kitchen in quartz. Prices are illustrative 2026 U.S. figures.

Quote 2417-1, version 1. Valid 30 days from issue date.

Material: [Brand] [Color] engineered quartz, 3cm (about 1-3/16 in), polished.

Measurements: 42 sq ft finished, estimated from customer plans. Final square footage is measured at templating and billed at the unit prices below. We charge full rectangles and do not deduct sink openings.

Line

Quantity

Unit price

Amount

Countertop: material, fabrication and installation

42 sq ft

$78

$3,276

Eased edge on all exposed edges

24 LF

Included

$0

Undermount sink cutout, polished, for [sink model]

1

$200

$200

Faucet hole (one included)

1

Included

$0

Soap dispenser hole

1

$50

$50

Cooktop cutout for 30-inch [cooktop model]

1

$175

$175

4-inch quartz backsplash

18 LF

$25

$450

Templating ($150, credited when this quote is accepted)

1

$0

$0

Removal and disposal of existing laminate tops

1

$250

$250

Delivery and installation within 25 miles

1

Included

$0

Subtotal



$4,401

Sales tax


Per state rules


Included: templating, fabrication, delivery, installation, sink mounting with clips and epoxy, seam filling, silicone at the wall.

Not included: plumbing disconnect and reconnect, electrical work, tile, painting, cabinet changes, permits.

Customer responsibilities: cabinets installed and level within 1/8 inch before templating; sink and faucet on site at templating; appliances and plumbing disconnected before install. A return trip because the site was not ready is $150.

Timeline: templating within about 5 business days of deposit; fabrication about 5 to 10 business days after template approval; installation typically within 2 weeks of templating.

Payment: 50% deposit to schedule templating and order material; balance due on the day of installation, before crews unload, unless state law sets a different schedule.

Changes: any change after acceptance needs a signed change order showing the old line, the new line and the price difference before we cut.

Warranty: one-year workmanship warranty on fabrication and installation. The quartz manufacturer's warranty applies to the material under its own terms.

Acceptance: signature, printed name, date.

The customer sees one clear total, every priced item and every exclusion. The shop can hand the same document to the templater and installer.

Itemize or give one price?

Itemize the scope so nothing is hidden. How you group the prices is a sales choice.

  • Every chargeable item should appear somewhere with its quantity. If the sink cutout, backsplash or tear-out is not on the quote, the customer will assume it is included, and any charge added later looks like a bait and switch.

  • Homeowners mostly compare the total, the lead time and how professional the quote looks. They do not need fabrication and material split into separate prices. Grouping lines by room (Kitchen, Master bath) with a total per room reads well.

  • Show separate prices where the customer is choosing: the edge upgrade, the waterfall, full-height versus 4-inch splash. That lets them decide one item at a time.

  • Builders and GCs usually want full line items in a format they can drop into their own bids. Match it and you get repeat work.

Internally, keep the fully itemized version, with cost, so you can check margin. See margins and markup.

Measurements and the price after templating

Most first quotes are estimates from plans, photos or tape measurements. The template gives the real numbers. Customers accept a change when the quote told them how it would work, and they fight one that appears as a surprise.

  • Label the quote as pre-template or post-template.

  • State the rule: the final price uses the quoted unit prices on the templated quantities. Many shops find pre-template estimates land within about 5 to 10% of the final.

  • Say how you measure. Most shops bill the full rectangle of each piece and do not deduct sink openings. A 33 x 22 inch sink opening is about 5 sq ft, so the convention alone can move a quote by hundreds of dollars.

  • Send a revised quote or change order before fabrication if the templated numbers change the price. Never let the first news be the final invoice.

Waste and slab count belong in your pricing, not as a surprise line. If you price by slab, say how many slabs the layout needs. See waste factor in bids.

Presenting options and upgrades

Customers often cannot decide between materials until they see the prices side by side. Give them a small, clear choice.

  • Offer up to three versions of the job, such as a good, better and best. Vary more than the stone. Change the edge, the backsplash and the features too, so each option is a complete, sensible kitchen.

  • Space the prices sensibly. If the options are within a few hundred dollars, the choice feels arbitrary. If the top option costs three times the bottom one, it looks out of reach.

  • Make the middle option the one you would recommend. In practice many customers choose it.

  • Show optional items as options, not in the total. "Optional: waterfall on left island end, add $1,500." The customer can say yes without the base price looking inflated.

  • Price upgrades as totals. "Ogee on the island adds $420" is easier to accept than "$20 per LF".

Keep one version of the job as the main quote in your records, so the sales pipeline does not count the same kitchen three times. Upgrade pricing is covered in pricing add-ons.

Payment terms, validity and price locks

  • Deposit and balance. A common residential structure is 50% at signing and the balance due at installation. Some shops use three payments: at signing, at template approval and at install. State whether "due at installation" means before the crew unloads or after the job is finished. Rules differ by state. In California, for example, a home improvement contract signed by a licensed contractor generally limits the down payment to $1,000 or 10% of the price, whichever is less (Business and Professions Code section 7159.5). Check your state's rules. See contracts, deposits and payments.

  • Validity. Thirty days is standard for retail quotes, 30 to 60 days for large or commercial jobs. Slab prices can move within weeks.

  • Price lock. Say what locks the price, usually the signed quote plus the deposit, after which the shop buys or holds the slab.

  • Card fees. If you charge a card fee, say so on the quote. Surcharge rules vary by state and card network.

  • Sales tax. States treat installed countertops differently. Some treat the job as an improvement to real property and tax the materials, others tax the whole sale. Word the quote so tax follows your state's rules.

Change orders

A change after the quote is signed is where margin and goodwill disappear. Every change order should show four things: the original line, the new line, the price difference as its own number (not buried in a new total) and a signature with a date. Get it signed before fabrication. Once stone is cut, a change usually means new material. State in the quote how changes are priced, for example at the quoted unit prices or at a stated hourly rate, and that they may move the schedule.

Quote mistakes that cause disputes

  • A generic material name ("granite, tan tones") with no color, thickness or slab.

  • No mention of tear-out, plumbing or backsplash, so the customer assumes they are included.

  • "Subject to change after template" with no rule for how much or how.

  • Edge profile named in the quote but not marked on the drawing, so the island ends up with the wrong edge.

  • Seam locations never discussed until install day. See seams.

  • Travel or return-trip fees that appear only on the final invoice.

  • A missing expiry date, so a customer signs a six-month-old quote at old slab prices.

  • Verbal promises that are not in writing: "we'll match the old backsplash", "no seam on the island".

For buyers: how to compare countertop quotes

Line up the quotes item by item before you compare totals. The cheapest total is often the one that left something out.

Example: shop A quotes $4,400 for 42 sq ft, including a cooktop cutout, 4-inch backsplash and tear-out. Shop B quotes $3,900 but lists none of those. Add them at shop A's prices ($175 + $450 + $250) and shop B's real total is $4,775. The cheaper quote was the more expensive one.

Check that every quote has:

  1. The same material, by brand, color and thickness. A 2cm quote is a different product from a 3cm quote.

  2. The same square footage, measured the same way.

  3. The edge profile by name, and the price of any upgrade.

  4. Every cutout and hole you need.

  5. The same backsplash scope.

  6. Templating, delivery and installation, and who does the install.

  7. Tear-out, plumbing and haul-away, included or excluded.

  8. The payment schedule, warranty and a written timeline.

Be wary of a quote with no written detail, a request for 100% payment up front before templating, a vague material description, or a price 25% or more below every other bid for the same scope. Ask what is different before you sign. See countertop cost overview.

Speed matters too

A complete quote that arrives in two days can lose to a decent one that arrives the same afternoon. A 2011 Harvard Business Review analysis (Oldroyd, McElheran and Elkington) of 1.25 million leads at 42 U.S. companies found that firms that tried to contact a web lead within an hour were nearly seven times as likely to qualify it as firms that waited even an hour longer. The same article's audit of 2,241 companies found an average response time of 42 hours. A standard price sheet, a cutout schedule and a quote template let a salesperson produce a full kitchen quote in minutes rather than an hour. See quoting speed and close rate.

Where software helps

Quotes go wrong when the price, the drawing and the customer document are kept in three places. In Stonify, the countertop drawing generates the quote lines for material, edges, splashes and waterfalls, and flags lines that no longer match after the layout changes. A quote is built from packages, usually one per room, and rollups combine detailed lines into one line per room on the customer document while the shop keeps the full detail. Alternatives let the salesperson offer a good, better and best version, with one marked as the main quote for reporting. Quote documents come from editable templates with drawings, an edge legend and optional line totals, each sent version gets its own number, and sales and change orders can carry a payment link with the deposit pre-filled.

FAQ

Is a countertop quote legally binding? An unsigned quote is an offer. Once the customer signs a quote that includes the price and terms, it generally works as a contract. That is why the terms belong on the quote, not in a separate conversation.

Should I show my price per square foot? Show the square footage and the total. Showing the per-square-foot rate helps customers compare, and it makes post-template adjustments easy to explain. Some shops show only room totals to homeowners and full unit prices to builders.

How detailed should the scope of work be? Specific enough that someone who never met the customer could build the job. "42 sq ft L-shaped counter with one undermount sink cutout, 12 sq ft island with a waterfall on the left end, 16 LF of 4-inch splash" is enough. "Kitchen countertops" is not.

Should the quote include the slab photo? For natural stone, yes, or at least the slab or lot number. It prevents the most common complaint in the trade: "that's not the slab I picked."

How long should it take to write a quote? With a price sheet and template, 15 to 30 minutes for a standard kitchen, longer for complex multi-room jobs. Quoting software can bring a standard kitchen down to a few minutes.

What if the customer wants to see the price without the extras? Show the base job and list the extras as optional items with their prices. Do not drop items that the job needs, such as the sink cutout. That only moves the argument to install day.

Ready to Run a Smarter Stone Operation?

Book a demo to see how Stonify can reduce costs at your shop.

Ready to Run a Smarter Stone Operation?

Book a demo to see how Stonify can reduce costs at your shop.