Technology
How to Track the Exact Slab a Customer Chose
Connect a showroom selection to one slab ID and photo. Use a worked substitution and a copyable selection record to hand the right piece to the yard.
When a customer picks a slab for its veining, save the individual slab ID and a photo of the face they chose against the job. Give the yard the same ID. A color name, supplier lot, or bundle number can narrow the search to the right group of slabs. Only the piece-level record tells the next person which one the customer stood in front of.
Give the Showroom and Yard the Same Starting Point
Imagine a couple chooses the slab with a dark vein crossing the upper left corner. Your salesperson writes “Calacatta, lot 42” on the quote. The yard has two pieces from that lot, and both descriptions match. The person who took the order is out when the yard calls. At that moment, a detailed memory of the showroom visit is less useful than one readable label in a photo.
Give each slab a unique shop ID, keep the supplier identifiers alongside it, and photograph enough of the face to recognize the pattern. Make it clear which photo belongs to which individual piece. If the customer only likes one area, keep a marked copy with that preference and the original full-face image for orientation. An unmarked close-up of a vein is hard to match to a whole slab a week later.
Copy This Selection Record Into One Real Job
Keep the record short enough that someone will complete it while the customer is still there. Use the same job reference on the quote and in inventory. If several rooms use the same color, name the room or piece the selection applies to.
Job, quote, and room or countertop piece.
Shop slab ID, supplier lot, and bundle if available.
Full-face photo reference and any customer-marked detail.
Current warehouse and bin, with the date checked.
Selection date, who recorded it, and the customer’s agreed scope.
Hold owner and expiry, when the shop has placed a hold.
Any layout or replacement approval still needed and who will follow up.
A preference for a particular face and approval of the final layout are separate decisions. For example, a customer can select slab S-214 today and still want to see how its strongest vein crosses the island seam. Keep the layout decision open until the agreed review happens. The shop’s hold and allocation policy should also tell sales what commitment it can make to the customer and when that commitment expires.
Work Through a Substitute Without Losing the Original Choice
In this fictional example, S-214 and S-215 came from supplier lot L42. The Palmer kitchen quote names S-214. Its selection photo shows a diagonal vein near the sink end. Before release, the yard flags S-214 for review and offers S-215 as a possible replacement. Its photo shows the strongest vein much closer to the center.
Keep S-214 on the original selection record. Add S-215 as a proposed substitute with its own photo, the reason for the proposal, and the person responsible for getting a decision. Show the customer each labeled image in the same orientation. If the vein position mattered in the original layout, show how the proposed slab would look in that layout as well.
If the customer accepts, save the decision, date, and approved replacement ID. Check the quote or job reference, the inventory commitment, and the material ID on the yard’s work instruction. Give the yard the updated instruction before release. If the customer declines or has yet to respond, keep the job pending on that decision. The next salesperson needs to see which piece was approved, which was proposed, and what can happen next.
Check the Handoff From Both Ends
Ask someone in the yard to start with the job number and find the selected slab’s ID, photo, and current bin. Then reverse the exercise. Give someone in sales the slab ID and ask which job has a claim on it. A move to a different bin should change the location while preserving the connection to the same physical piece. If staff have to recognize a filename, call a colleague, or guess from the color, record the exact missing detail.
For a useful acceptance test, run the same lookup after the fictional substitution. The yard should be able to find S-215 on the Palmer job. The office should still be able to explain why S-214 appeared on the first quote. A stock count can be correct throughout this exercise even when the wrong piece is promised. That is why the two-way lookup deserves its own test when you evaluate stone slab tracking.
Try the Two-Slab Test in Stonify
Stonify Inventory gives each slab a unique barcode and keeps its photos, lot, bundle, warehouse, bin, and inventory history with the piece. Sales can place a hold on a specific piece for a quote and customer with an expiration date. That gives the showroom and the yard a shared answer when a customer asks, “Is the slab I picked still here?” Your shop can also decide how it wants to capture a customer’s acceptance of a replacement and who may release it.
Bring two sample slab photos and a fictional quote to a Stonify demo. Have one person hold the selected piece and another locate it from the yard side. Then introduce the substitute. Follow both IDs until the team can identify the agreed slab and explain what happened to the first choice.
Related Articles
Slab imaging and labeling: photographing slabs and tracking them with barcodes, QR codes and RFID
How shops photograph and scan slabs, label slabs and pieces with barcodes, QR or RFID, and which printers and labels survive a wet yard.
Slab Hold vs. Allocation: A Shop Policy Template
A temporary slab hold supports an undecided quote. An allocation reserves material for a committed job. Use this policy template to define ownership, expiration, extensions, conversion, and release without confusing either status with fabrication readiness.
Slab inventory management: how to track, label and allocate stone slabs
How fabrication shops track slabs by lot and bundle, receive and label them, hold and allocate them to jobs, count the yard and value inventory at landed cost.