Shop Operations

How to Prevent Approval of an Outdated Countertop Drawing

Prevent customers from signing an obsolete countertop drawing by controlling revision identity, access, approval requests, superseded files, and production release.

To prevent approval of an outdated countertop drawing, give every approval package a job number, revision number, date, and clear scope; expose only the current approval request to the customer; mark or archive superseded files; and release the job only when the signed revision matches the drawing assigned to production. A customer viewing a file or signing the sales contract is not proof that the current fabrication drawing was approved.

Define the One Drawing That Is Current

A current drawing is not simply the newest file in a folder. It is the revision the shop has reviewed, the customer is being asked to approve, and production will use if the approval is completed. Record the revision in the file name, title block, approval document, project record, and production-release check.

The approval scope should name what the signature covers: pieces, dimensions, seams, edges, cutouts, overhangs, backsplash, material, finish, and, when relevant, slab layout or vein direction. If a change affects any of those items, issue a new revision and a new approval request.

Use a Current-Revision Approval Checklist

  • Assign one job number and one revision number or letter to the drawing and approval document.

  • Show the revision date and the reason for the change in a short revision note.

  • Confirm that the customer contact and the shop reviewer are looking at the same revision.

  • Remove the old approval request from the customer-facing current view, or label it clearly as superseded.

  • Require a signature tied to the current drawing, not only to the quote or contract.

  • Compare the signed revision with the drawing attached to the work order before release.

  • Keep the superseded drawing, prior approval, and change history in the project record without presenting them as current.

The existing countertop drawing revision log records what changed and who owns the next step. The shop drawings and work orders guide explains what a fabrication drawing should contain and why written approval should precede cutting.

Original Example: Revision 2 Must Not Authorize Revision 3

This fictional example is job 731, a kitchen with an island and one undermount sink. Revision 2 shows the island seam six inches left of center and a 33-inch sink. After review, the customer chooses a 36-inch sink and asks to move the seam. The drafter issues revision 3 with the new cutout, seam position, date, and a note describing both changes.

The customer had opened revision 2 but had not signed its drawing approval. The office publishes revision 3 as the current approval package and marks revision 2 superseded. The customer signs revision 3. Before production release, the coordinator checks that the approval says revision 3 and that the work order links to revision 3. The viewed timestamp for revision 2 remains useful history, but it does not authorize cutting.

Now change the test: assume the customer signed revision 2 before requesting the larger sink. Revision 3 still needs a new approval because the cutout and seam changed after the signature. The old signature proves what was accepted earlier; it does not approve the new geometry. This example is a workflow test, not legal advice or a substitute for contract language reviewed for the shop’s state.

Stop Obsolete Approvals at Production Release

The final control belongs at the handoff to programming and cutting. The release check should compare three values: the revision on the signed approval, the revision on the production drawing, and the revision referenced by the work order. If any value differs or an approval is missing, the job waits.

Use the countertop production release checklist for the broader go/no-go decision. Keep customer-facing approvals separate from internal review notes so a customer does not have to interpret draft markups or shop-only concerns.

Test a Customer Portal Before You Buy

Use two sample drawings in a software demo. Publish revision 2, give a test customer access, and open it. Then publish revision 3 and send a new approval request. Verify that the customer can identify revision 3, cannot mistake revision 2 for the active request, and signs a document tied to revision 3. From the office view, confirm who has access, when the contact last visited, and which document was signed.

Also test a builder account with several contacts, a homeowner who opens the old email link after the revision changes, and a drawing that changes again after approval. Ask how the portal preserves history, withdraws or supersedes a request, and prevents the shop from releasing the wrong revision.

Run the Two-Revision Test in Stonify

Stonify Customer Portal lets customers open drawings and sign project documents while the office chooses which folders they can see. Stonify’s current release notes also state that the project shows which contacts have access and when they last looked. Those controls support a version-aware approval workflow when the shop applies a clear revision and release policy.

Bring one real redacted job with two drawing revisions to a Stonify demo. Ask the presenter to replace the current drawing, request the new signature, identify the signed revision, and show the production handoff. The test succeeds when the customer, office, and shop floor all name the same revision without checking an email thread.

Ready to Run a Smarter Stone Operation?

Book a demo to see how Stonify can reduce costs at your shop.

Ready to Run a Smarter Stone Operation?

Book a demo to see how Stonify can reduce costs at your shop.